37 Dolly Setup - PROAIM CINEMA P-W5P-WING Assembly Manual

D-37 Dolly Assembly
NOTE: To avoid unwanted accident while assembling the crane, please assemble the dolly with supporting
feet. It also increases the stability.
•
Loosen and remove the Allen bolts &
Washer from the outer legs of the dolly
using a spanner.
•
After removing the bolt along with the
washer properly pull each leg out until it
reaches the joining point.
•
After spreading both the legs of the D-37
Dolly, Insert the bolt with the washer, nut
matching the bottom thread of the dolly.
•
Properly tighten the bolt and nut using a
spanner.
•
Follow the same process for the remaining
legs.
•
Now, loosen and remove the bolts, washer
& bolts of the D-37 Dolly leg using the Allen
key, as shown in the image.
•
Similarly, remove the bolts of the remaining
leg and place the dolly platform on the
Dolly.
7