3-Axis Joystick Controller Setup - PROAIM CINEMA P-W5P-WING Assembly Manual

•
Now, PT-SPIN-3 is properly attached to the
front of the Jib section.
•
Mount your camera
camera mounting plate of Pan Tilt Head.
•
Insert the check nut through the bottom of
the head and secure the camera with the
help of an Allen key.
•
Camera is properly secured with head
section as shown in the image.

3-Axis Joystick Controller Setup

•
Connect the handle
controller as shown in the picture.
The Pan Tilt Head circuitry is built entirely into the Joystick Controller. The only requirement is AC
adapter (Included) or Battery Power (Not included). The AC adapter can handle 100-240 volts. Users will
need the appropriate plug adapter for local use.
•
Install your cable starting at the camera end
and making sure to leave enough slack for
full pan and tilt movements.
•
Connect 15mtr control cable with motor
cable.
•
Then connect the other cable to the main
cable port on the joystick controller.
(Not Included) on
to the joystick
16