TL-SG3109/TL-SL3428/TL-SL3452
When changing a device mode to enable, enter george at the password
prompt.
4.5.3.3 Configuring an Initial Telnet Password
To configure an initial Telnet password, enter the following commands:
console(config)# aaa authentication login default line
console(config)# aaa authentication enable default line
console(config)# line telnet
console(config-line)# login authentication default
console(config-line)# enable authentication default
console(config-line)# password bob
When initially logging onto a device through a Telnet session, enter bob at the
password prompt.
When changing a device mode to enable, enter bob.
4.5.3.4 Configuring an Initial SSH password
To configure an initial SSH password, enter the following commands:
console(config)# aaa authentication login default line
console(config)# aaa authentication enable default line
console(config)# line ssh
console(config-line)# login authentication default
console(config-line)# enable authentication default
console(config-line)# password jones
When initially logging onto a device through a SSH session, enter jones at the
password prompt.
When changing a device mode to enable, enter jones.
Gigabit Managed Switch Family Installation Guide
38