Security Management And Password Configuration - TP-Link TL-SG3109 Installation Manual

TL-SG3109/TL-SL3428/TL-SL3452
Note
When the device reboot begins, any input at the ASCII terminal or keyboard
automatically cancels the BOOTP process before completion, and the device
does not receive an IP address from the BOOTP server.
The following example illustrates the process:
console> enable
console# delete startup-config
Startup file was deleted
console# reload
You haven't saved your changes. Are you sure you want to continue (Y/N)[N]?
This command will reset the whole system and disconnect your current
session. Do you want to continue (Y/N)[N]?
***************************************************
***************** SYSTEM RESET *****************
***************************************************
3. To verify the IP address, enter the show ip interface command. The
device is now configured with an IP address.

4.5.3 Security Management and Password Configuration

System security is handled through the AAA (Authentication, Authorization,
and Accounting) mechanism that manages user access rights, privileges, and
management methods. AAA uses both local and remote user databases. Data
encryption is handled through the SSH mechanism.
The system is delivered with no default password configured; all passwords
are user-defined. If a user-defined password is lost, a password recovery
procedure can be invoked from the Startup menu. The procedure is applicable
for the local terminal only and allows a one-time access to the device from the
local terminal with no password entered.
Gigabit Managed Switch Family Installation Guide
36