Configuration Overview - TP-Link TL-SG3109 Installation Manual

TL-SG3109/TL-SL3428/TL-SL3452
indicates that no problems were encountered during boot.
During boot, the Startup menu can be used to run special procedures. To
enter the Startup menu, press <Esc> or <Enter> within the first two seconds
after the auto-boot message is displayed.
If the system boot process is not interrupted by pressing <Esc> or <Enter>,
the process continues decompressing and loading the code into RAM. The
code starts running from RAM and the list of numbered system ports.
After the device boots successfully, a system prompt is displayed (console>)
which is used to configure the device. However, before configuring the device,
ensure that the latest software version is installed on the device. If it is not the
latest version, download and install the latest version. For more information on
downloading the latest version, see Software Download [Option 1].

4.4 Configuration Overview

Before assigning a static IP address to the device, obtain the following
information:
A specific IP address that has been allocated to the device in order for it to

be configured.
Default route.

Network mask for the network.

There are two configuration types:
Initial Configuration — Consists of configuration functions with basic

security considerations.
Advanced Configuration — Consists of dynamic IP configuration and more

advanced security considerations.
Gigabit Managed Switch Family Installation Guide
26