Table of Contents
Advertisement
TL-SG3109/TL-SL3428/TL-SL3452
The switch is ready to receive the file via the XModem protocol.
2. Specify the path of the source file to begin the transfer process.
The following is an example of the information that appears:
console# copy xmodem: image
Please download program using XMODEM
4.6.2 Erasing the Flash File [Option 2]
In some cases, the device configuration must be erased. If the configuration
is erased, all parameters configured via CLI, EWS, or SNMP must be
reconfigured.
To erase the device configuration:
1. From the Startup menu, press [2] within two seconds to erase the flash
file. The following message is displayed:
Warning! About to erase a Flash file.
Are you sure (Y/N)? y
2. Press Y . The following message is displayed.
Write Flash file name (Up to 8 characters, Enter for none.):config
File config (if present) will be erased after system initialization
======== Press Enter To Continue ========
3. Enter config as the name of the flash file. The configuration is erased and
the device reboots.
4. Repeat the initial device configuration.
4.6.3 Password Recovery [Option 3]
Gigabit Managed Switch Family Installation Guide
46
Hide quick links:
Advertisement
Table of Contents
