Table of Contents
Advertisement
TL-SG3109/TL-SL3428/TL-SL3452
[1] Download Software
[2] Erase Flash File
[3] Password Recovery Procedure
[4] Enter Diagnostic Mode
[5] Set Terminal Baud-Rate
[6] Back
Enter your choice or press 'ESC' to exit:
The Startup menu procedures can be performed using the ASCII terminal or
Windows HyperTerminal. The following sections describe the available Startup
menu options.
Note
When selecting an option from the Startup menu, time must be taken into
account. If no selection is made within 35 seconds (default), the device times
out. This default value can be changed through the CLI.
Only technical support personnel can use Diagnostics Mode. For this reason,
Diagnostics Mode is not described in this guide.
4.6.1 Software Download [Option 1]
The software download procedure is performed when a new version must be
downloaded to replace corrupted files, or when the system software must be
upgraded. To download software from the Startup menu:
1. From the Startup menu, press [1]. The following prompt appears:
Downloading code using XMODEM
2. When using HyperTerminal, click Transfer on the HyperTerminal Menu
Bar.
Gigabit Managed Switch Family Installation Guide
41
Hide quick links:
Advertisement
Table of Contents
