Table of Contents
Advertisement
TL-SG3109/TL-SL3428/TL-SL3452
3. In the Filename field, enter the file path for the file to be downloaded.
4. Ensure that the Xmodem protocol is selected in the Protocol field.
5. Press Send. The software is downloaded.
Note
After software download, the device reboots automatically.
Software can also be downloaded through a TFTP.
4.6.1.1 Software Download through TFTP Server
This section contains instructions for downloading device software (system
and boot images) through a TFTP server. The TFTP server must be
configured before beginning to download the software. This section contains
the following topics:
System Image Download
Boot Image Download
System Image Download
The device boots and runs when decompressing the system image from the
flash memory area where a copy of the system image is stored. When a new
image is downloaded, it is saved in the area allocated for the other system
image copy.
On the next boot, the device decompresses and runs the currently active
system image unless otherwise directed.
To download a system image through the TFTP server:
1. Ensure that an IP address is configured on one of the device ports and
pings can be sent to the TFTP server.
Gigabit Managed Switch Family Installation Guide
42
Hide quick links:
Advertisement
Table of Contents
