Table of Contents
Advertisement
TL-SG3109/TL-SL3428/TL-SL3452
setting is for Terminal keys (not Windows keys).
Note
When using HyperTerminal with Microsoft
have Windows 2000 Service Pack 2 or later installed. With Windows
Service Pack 2, the arrow keys function properly in HyperTerminal's VT100
emulation. Go to www.microsoft.com for information on Windows 2000 service
packs.
3. Connect the cable to the console port on the device front panel.
3.3.2 AC Power Connection
To connect the power supply perform the following:
1. Using a 5-foot (1.5 m) standard power cable with safety ground connected,
connect the power cable to the AC main socket located on the back panel.
2. Connect the power cable to a grounded AC outlet.
3. Confirm that the device is connected and operating by checking that the
Power Supply LED on the front panel is green.
Gigabit Managed Switch Family Installation Guide
®
Windows 2000, ensure that you
21
®
2000
Hide quick links:
Advertisement
Table of Contents
