Table of Contents
Advertisement
External sensors (optional)
3.1.2
Required material and tools
Material
Tool
Flush plate Visign for Public 6
Protected zone
Fig. 10: Protected zones
According to the applicable regulations, installation of the power pack in
the protected zones 0 and 1 of shower rooms and bathrooms is not per‐
mitted, see
Ä 'Regulations from section: Fields of application /
Mounting conditions' on page 5.
Viega recommends installing the power pack outside of the protected
zones 0–2.
If external sensors are to be connected to the control, their connection
cables or empty pipes must be laid in the cistern before tiling is begun.
The following material is required for mounting:
If necessary, empty pipe from power pack into the cistern
n
If necessary, accessories for the extension of the system
n
2.4.4 'System expansions' on page 12
The following tools are required for mounting:
Flat-blade screwdriver
n
Torx screwdriver (T 10)
n
Fork spanner (size 19)
n
Blade (cutter)
n
Handling
Ä Chapter
18
Advertisement
Table of Contents
