Flush plate Visign for Public 6
▶
Hold the magnetic key over the programming contact.
In the following, signals sound to show which setting is active.
▷
▶
Remove magnetic key to enable setting.
The following values can be set by removing the magnetic key:
Remove magnetic key after
1st acoustic signal
2nd acoustic signal
3rd acoustic signal
▷
A double acoustic signal is sounded as confirmation. The setting
has been changed successfully.
▶
Remove the cable of the programming contact.
Setting
Flush volume small 3 l and
large 4.5 l
Flush volume small 3 l and
large 6 l (factory setting)
Flush volume small 4 l and
large 9 l
Handling
37