Table of Contents
Advertisement
Additional radio controlled actuation
2.4.5
Setting options
Settings for the infrared sensor
Flush plate Visign for Public 6
Fig. 8: Connection of radio controlled actuation
One requires the following accessories to be able to connect the
infrared sensor alongside a radio controlled actuation as shown:
With the extension cable adapter model 8350.36, an additional sensor
can be connected to the infrared sensor.
Signals to actuate the flush (e. g. on support hinged handles) sent by
HEWI radio transmitters can be received by the radio receiver model
8350.35.
Range of the infrared sensor
The close range is set at 0 to 3 cm.
Product information
14
Advertisement
Table of Contents
