Table of Contents
Advertisement
3.2.4
Mounting the flush plate
Flush plate Visign for Public 6
Requirements:
The flush actuation has been mounted.
n
The battery compartment has also been mounted.
n
The control has been connected and set.
n
▶
Insert the threaded bolts left and right into the holders.
The threaded anchors must be positioned to the top and bottom.
▶
Insert the threaded bolts so deeply that the upper edge of the
threaded bolt sticks out approx. 20 mm behind the upper edge of
the tiles.
▶
Fasten threaded bolts with a 90° turn.
20
▶
Remove the installation frame from the flush plate.
Carefully lead the installation frame along the connection cable.
Handling
31
Advertisement
Table of Contents
