Table of Contents
Advertisement
Error Logs
Reset Functions
Enter the control menu and select Reset Functions, press ENTER. Use the UP/DOWN button
to select Pan &Tilt, Effect or All.
Pan & Tilt
Effect
Select Error Logs, press ENTER.
Use UP/DOWN button to select Fixture Errors, confirm your selection
with ENTER.
The error list is displayed.
Use UP/DOWN button to select Reset Error Log, confirm your selection
with ENTER.
If you wish to reset the relevant error logs, select Yes. If you do not wish
to reset anything, select No. Confirm your selection with ENTER.
If you select Yes, use UP/DOWN button to set the password 050,
confirm your selection with ENTER. The relevant error logs are reset.
To exit the menu, press MENU, or wait 30 seconds.
Select Pan & Tilt, press ENTER.
Use UP/DOWN button to select No or Yes (the device will run built-in
program to reset pan/tilt to their home positions), confirm your selection
with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Effect, press ENTER.
Use UP/DOWN button to select No or Yes (the device will run built-in
program to reset effect to their home positions), confirm your selection
with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
- 20 -
Advertisement
Table of Contents
