Table of Contents
Advertisement
Dimmer Curve
Soft Filter
Lamp Settings
Enter the control menu and select Lamp Settings, press ENTER. Use the UP/DOWN button
to select Lamp On/Off or State/Power On.
Lamp On/Off
State/Power On
Select Dimmer Curve, press ENTER.
Use UP/DOWN button to select Square Law, Inv SQ Law, Linear or S
Curve, confirm your selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Soft Filter, press ENTER.
Use UP/DOWN button to select Auto, Disable or Enable, confirm your
selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select Lamp On/Off, press ENTER.
Use UP/DOWN button to select Off (lamp off) or On (lamp on), confirm
your selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
Select State/Power On, press ENTER.
Use UP/DOWN button to select Off (lamp off while power on) or On
(lamp on while power on), confirm your selection with ENTER.
To exit the menu, press MENU, or wait 30 seconds.
- 16 -
Advertisement
Table of Contents
