Scsi Controller Enable/Disable; Scsi Termination Enable/Disable - Supermicro X6DLP-EG2 User Manual

SCSI Controller Enable/
Disable (*ForX6DLP-4G2
only)
Jumper JPA1 allows you to enable
or disable the SCSI Controller.
default setting is pins 1-2 to enable all
four headers. See the table on the right
for jumper settings.
SCSI Termination Enable/
Disable (*ForX6DLP-4G2
only)
Jumper JPA2 allows you to enable or
disable termination for the SCSI con-
nector. The default setting is open
to enable the termination of the SCSI
Controller. (*Note: In order for the SCSI
drives to function properly, please do
not change the default setting set by
the manufacturer.) See the table on
the right for jumper settings.
GLAN1
Battery
GLAN2 GLAN2
B
The
8-pin
PW3
PWR
A
2-23
Chapter 2: Installation
SCSI Enable/Disable
Jumper Settings
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
SCSI Termination Enable/
Disable
Jumper Settings
Jumper Setting Defi nition
Open (*Default) Enabled
Closed Disabled
A. SCSI Enable
B. SCSI Term. Enable