Supermicro X6DLP-EG2 User Manual page 90

X6DLP-4G2/X6DLP-EG2 User's Manual
Creating Arrays
Before you create arrays, make sure that the disks for the array are connected and
installed in your system. Note that disks with no usable space, or disks that are un-
initialized are shown in gray and cannot be used. See Initializing Disk Drives.
To create an array:
1 Turn on your computer and press Ctrl+A when prompted to access the ARC
utility.
2 From the ARC menu, select Array Confi guration Utility Main Menu (ACU) (as
shown on the fi rst screen on page C-5).
3 From the ACU menu, select Create Array.
4 Select the disks for the new array and press Insert (as the screen shown be-
low).
(*Note: To de-select any disk, highlight the disk and press Delete.)
5 Press Enter when both disks for the new array are selected. The Array Properties
menu displays (as the screen shown on the next page).
C-6