Table of Contents
Advertisement
X6DLP-4G2/X6DLP-EG2 User's Manual
Heatsink Installation
1. Do not apply any thermal grease to the
heatsink or the CPU die-the if the required
amount has already been applied.
2. Locate the four heatsink mounting holes
on the motherboard.
3. Place the heatsink on top of the CPU
and insert heatsink's four pegs into the
heatsink mounting holes.
4. Using a Phillips Screw driver, screw in
two diagonal screws (ie the #1 and the
#2 screws) until just snug (-do not fully
tighten the screws to avoid possible dam-
age to the CPU.) Repeat the same step to
install the remaining two screws.
5. Repeat the steps above to install an-
other heatsink, if needed.
CPU Socket (w/CPU installed)
4 heatsink mounting holes
Screw#1
Heatsink (with screws
properly installed)
2-4
Screw#2
Advertisement
Table of Contents
