Wake-On-Lan; Wake-On-Ring - Supermicro X6DLP-EG2 User Manual

Wake-On-LAN

The Wake-On-LAN header is des-
ignated JWOL on the motherboard.
See the table on the right for pin
defi nitions. You must enable the LAN
Wake-Up setting in BIOS to use this
function. (You must also have a LAN
card with a Wake-On-LAN connector
and cable to use this feature.)

Wake-On-Ring

The Wake-On-Ring header is des-
ignated JWOR. This function allows
your computer to receive and to be
awakened by an incoming call to the
modem when in suspend state. See
the table on the right for pin defi nitions.
You must have a Wake-On-Ring card
and cable to use this feature.
GLAN1
Battery
GLAN2
GLAN2
A
B
8-pin
PW3
PWR
2-15
Chapter 2: Installation
Wake-On-LAN
Pin Defi nitions
(JWOL)
Pin# Defi nition
1 +5V Standby
2 Ground
3 Wake-up
Wake-On-Ring
Pin Defi nitions
(JWOR)
Pin# Defi nition
1 Ground (Black)
2 Wake-up
A. WOL
B. WOR