Scsi Controller Enable/Disable; Scsi Termination Enable/Disable - Supermicro X6DVA-4G2 User Manual

X6DVA-4G2/X6DVA-EG2 User's Manual
SCSI Controller Enable/
Disable (*For the X6DVA-
4G2 only)
Jumper JPA1 allows you to enable
or disable the SCSI Controller. The
default setting is pins 1-2 to enable all
four headers. See the table on the right
for jumper settings.
SCSI Termination Enable/
Disable (*For the X6DVA-
4G2 only)
Jumper JPA2 allows you to enable or
disable termination for the SCSI con-
nector. The default setting is open to
enable the termination of the SCSI
Controller. Note: In order for the SCSI
drives to function properly, please do
not change the default setting set by
the manufacturer. See the table on the
right for jumper settings.
8-pin
PWR
PW1
Battery
GLAN1
GLAN2
PW3
2-22
SCSI Enable/Disable
Jumper Settings
Jumper Setting Defi nition
Pins 1-2 Enabled
Pins 2-3 Disabled
SCSI Termination Enable/
Disable
Jumper Settings
Jumper Setting Defi nition
Open (*Default) Enabled
Closed Disabled
SCSI Enable
SCSI Term. Enable