Supermicro X6DLP-EG2 User Manual page 11

Quick Reference ( X6DLP-4G2/X6DLP-EG2)
Jumper Description
J13/J15 PCI #1/PCI-X #5,#6 to System SMB
JBT1 CMOS Clear
JPA1 (*Note) SCSI Controller Enable
JPA2 (*Note) SCSI Channel Term. Enable
JPF Power Force on
JPG1 VGA Enable
JPL1/JPL2 LAN1/LAN 2 Enable/Disable
JPR1 Power Fail Alarm Reset
JWD Watch Dog Enable
Connector
ATX PWR (PW1)
8-pin PWR (PW2)
Chassis Intru. (JL1)
COM1 (J4)/COM2 (J5)
DIMM 1A-4B (J18-J23)
DS1, DS5, DS7-DS8
DS9
FAN 1-6
Floppy (J24)
FP CTRL (JF1)
GLAN 1/2
IDE1 (J44), IDE2 (J38)
IPMI (J41)
KB/MS (J2)
Parallel Port (J10)
PWR LED/SPKR (JF2)
PW3
PW4
SCSI (J28)
Slot1
Slot5/Slot6
Slot4/J12 (PCI-E x8)
I-SATA0/1 (JS0/JS1)
VGA (J1)
WOL (JWOL)
WOR (JWOR)
USB 0/1 (J3)
USB 2/3
(*Note: for the X6DLP-4G2 only)
Description
Primary 24-pin ATX PWR Connector (Required)
12V 8-pin PWR Connector (Required)
Chassis Intrusion Header
COM1/COM2 Serial Port Connector/Header
Memory (RAM) Slots (1A,1B, 2A,2B, 3A,3B, 4A,4B)
Onboard LED Indicators (*See Chapter 2)
DS7/DS8:POST Code LED (*See Chpt.2 & App.A)
System LED (*See Chapter 2)
CPU/Chassis Fan Headers
Floppy Disk Drive Connector
Front Control Panel Connector
G-bit Ethernet Ports
IDE1/2 Hard Disk Drive Connectors
IPMI 2.0 Socket
Keyboard/Mouse
Parallel (Printer) Header
PWR LED (Pins1-3), Speaker (Pins 5-7)
Power SMB (System Management Bus)
PWR Fault
SCSI Connector (*Note)
Slot1: PCI#1 32-bit 33MHz
Slot5: PCIX#5 66MHz/Slot6: PCIX#6 66MHz ZCR
PCI-Express x8 Slots
Intel Serial ATA0, Serial ATA1 Connectors
VGA Connector
Wake-on-LAN Header
Wake-on-Ring Header
(Back Panel) Universal Serial Bus Ports
(Front Panel) Universal Serial Bus Headers
1-5
Chapter 1: Introduction
Default Setting
Open (Disabled)
See Chapter 2
Pins 1-2 (Enabled)
Off (Enable)
Open (Disabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Open (Disabled)
Pins 1-2 (Enabled)