Supermicro X6DLP-EG2 User Manual page 58

X6DLP-4G2/X6DLP-EG2 User's Manual
Execute Disable Bit
Set to Enabled to enable the Execute Disable Bit to allow the processor to classify
areas in the system memory where an application code can execute and where
it cannot, thus preventing a worm or a virus from creating a fl ood of codes to
overwhelm the processor or damage the system during an attack. (Note: For
more information regarding hardware/software support for this function, please
refer to Intel's and Microsoft's web sites.
Core Multi-Processing
Select Enabled to enable the function of multiple CPU core processing. if Dis-
able, one CPU execution core will be disabled.
CPU TM Function
This feature allows the user to activate the CPU thermal monitor mechanism. TM1
allows the CPU to regulate its power consumption based upon the modulation of
the CPU Internal clock when the CPU temperature reaches a pre-defi ned overheat
threshold. The options are Disabled and Enabled.
allow the CPU to reduce its power consumption by lowering the CPU frequency
and the CPU voltage when the CPU temperature reaches a pre-defi ned overheat
threshold. TM2 is available only when it is supported by the CPU.
IDE Confi guration Sub-Menu
When this sub-menu is selected, the AMI BIOS automatically displays the follow-
ing items:
IDE Confi guration
This feature allows the user to confi gure the IDE mode. The options are
Disabled, P-ATA (Parallel ATA) only, S-ATA (Serial ATA) only and P-ATA & S-
ATA.
Combined Mode Operation
This feature allows the user to select the IDE Combined Mode. The options
are P-ATA 1st Channel and S-ATA 1st Channel.
S-ATA Ports Defi nition
This feature allows the user to confi gure the Serial ATA Ports. The options are
P0-Master/P1-Slave and P0-Slave/P1-Master
Primary IDE Channel Master/Slave, Secondary IDE Channel Master/
Slave, Third IDE Master/Slave, Fourth IDE Channel Master/Slave
These settings allow the user to set the parameters of Primary IDE Channel Master/
Slave, Secondary IDE Channel Master/Slave, Third IDE Master/Slave, Fourth IDE
Channel Master/Slave slots. Hit <Enter> to activate the following sub-menu screen
for detailed options of these items. Set the correct confi gurations accordingly. The
items included in the sub-menu are:
(*Available when supported by the OS and the CPU.)
(*Available when supported by the CPU.)
(*Available when supported by the CPU.)
4-4
(*Note: Select Enabled to
.