Table of Contents
Advertisement
X6DLP-4G2/X6DLP-EG2 User's Manual
Rebuilding Arrays
*Note 1: Rebuilding applies to Fault Tolerant array (RAID 1) only.
If an array Build process (or initialization) is interrupted or critical with one member
missing, you must perform a Rebuild to optimized its functionality. For a critical array
Rebuild operation, the optimal drive is the source drive.
*Note 2: If no spare array exists and a hard disk drive fails, you need to
create a spare before you can rebuild an array.
To Rebuild an array:
1 From the Main Menu, select Manage Arrays (as shown in the screen below).
From the List of Arrays, select the array you want to Rebuild.
2 Press Ctrl+R to Rebuild.
C-14
Advertisement
Table of Contents
