Supermicro X6DLP-EG2 User Manual page 10

X6DLP-4G2/X6DLP-EG2 User's Manual
Figure 1-2. SUPER X6DLP-4G2/X6DLP-EG2 Motherboard Layout
JLAN1
JLAN2
Important Notes to the User
• All images and graphics shown in this manual were based upon the latest
PCB Revision available at the time of publishing of this manual. The mother-
board you've received may or may not look exactly the same as the graphics
shown in this manual.
• See Chapter 2 for detailed information on jumpers, I/O ports and JF1 front
panel connections.
• " " indicates the location of "Pin 1".
• SCSI is available on the X6DLP-4G2 only.
• When the LE1 LED is on, the 5V Standby PWR is on. Maker sure to turn off
the power before installing or removing components.
(not drawn to scale)
8-pin
PWR
PW1
Battery
1-4
PW3