Appendix D: System Specifications - Supero 7043M-6 User Manual

Supermicro superserver 7043m-6 servers: user guide
Table of Contents

Advertisement

Appendix D: System Specifications

Appendix D
System Specifications
Processors
®
TM
Single or dual 603/604-pin Intel
Xeon
processors to 3.20 GHz at a front
side (system) bus speed of 533/400 MHz
Note: Please refer to the support section of our web site for a complete listing of
supported processors. (http://www.supermicro.com/TechSupport.htm)
Chipset
Intel E7501 chipset
Memory Capacity
Six 184-pin DDR DIMM sockets supporting up to 12 GB of registered ECC
DDR266/200 (PC2100/1600) SDRAM
Note: Interleaved memory - requires memory to be installed two at a time. See the
memory section in Chapter 5 for details.
Operating Systems Supported
Windows NT, Windows 2000, Solaris, Netware, SCO UNIX and Linux
SCSI Controller
7043M-8: Adaptec AIC-7902 for single channel, Ultra320 onboard SCSI
7043M-6: Adaptec AIC-7899W for single channel, Ultra160 onboard SCSI
Peripheral Drives/Bays
One (1) 3.5" floppy drive
Three (3) 5 1/4" drive bays
Seven (7) 3.5" x 1" drive bays (for SCSI drives)
Expansion Slots
Chassis: Seven (7) I/O chassis slots
Motherboard: Total of three (3) PCI-X and three (3) PCI slots
D-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

7043m-8Superserver 7043m-6Superserver 7043m-8

Table of Contents