Security - Supero 7043M-6 User Manual

7-5

Security

Choose Security from the Phoenix BIOS Setup Utility main menu with the arrow
keys. You should see the following display.
displayed by highlighting the setting using the arrow keys and pressing <Enter>.
All Security BIOS settings are described in this section.
Main Advanced
Supervisor Password Is:
User Password Is:
Set Supervisor Password:
Set User Password:
Password on Boot
Fixed Disk Boot Sector
F1 Help Select Item
Esc Exit Select Menu
Supervisor Password Is:
This displays whether a supervisor password has been entered for the
system. Clear means such a password has not been used and Set means
a supervisor password has been entered for the system.
User Password Is:
This displays whether a user password has been entered for the system.
Clear means such a password has not been used and Set means a user
password has been entered for the system.
Security Power
[Clear]
[Clear]
[Enter]
[Enter]
[Disabled]
[Normal]
-/+ Change Values
Enter Select!Sub-Menu
7-15
Security setting options are
Phoenix BIOS Setup Utility
Boot PIR
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
Chapter 7: BIOS
Exit