Table of Contents
Advertisement
S
S
UPER
ERVER 7043M-8/7043M-6 Manual
SMART Device Monitoring
This setting lets you enable or disable SMART device monitoring, which may
predict IDE drive failure. The options are Enabled and Disabled.
ECC Configuration
This setting lets you enable or disable ECC (Error Correction and Checking).
The options are ECC and Disabled.
ECC Error Type
This setting lets you select which type of interrupt will be activated as a result
of an ECC error. The options are None, NMI (Non-Maskable Interrupt), SMI
(System Management Interrupt) and SCI (System Control Interrupt.
SERR Signal Condition
This setting specifies the conditions required to qualify as an ECC error.
Options are None, Single Bit, Multiple Bit and Both.
! ! ! ! ! Advanced Processor Options
Access the submenu to make changes to the following settings.
CPU Speed
This is a display that indicates the speed of the installed processor.
Fast String Operations
This setting allows you to Enable or Disable fast string operations.
Compatible FPU Code
This setting allows you to Enable or Disable the compatible FPU code.
7-12
Advertisement
Table of Contents
