Table of Contents
Advertisement
! ! ! ! ! PCI/PnP Configuration
Access the submenu for this item to make changes to the PCI/PnP
configuration, as listed below.
Onboard LAN1 OPROM Configure
Enabling this setting allows you to boot your system from LAN 1. Options
are Enabled and Disabled.
Onboard LAN2 OPROM Configure
Enabling this setting allows you to boot your system from LAN 2. Options
are Enabled and Disabled.
Legacy USB Support
This setting allows you to enable support for Legacy USB devices. The
settings are Enabled and Disabled.
Installed OS
This setting allows you to select the operating system for your computer.
The settings are Other, Win95, Win98, WinMe and Win 2000.
NT4 Installation Workaround
This setting allows BIOS to provide a workaround for the absence of a
floppy drive during NT4 installation. Options are Enabled and Disabled.
Reset Configuration Data
Options are Yes and No. Choosing Yes will clear the Extended System
Configuration Data (ECSD).
7-7
Chapter 7: BIOS
Advertisement
Table of Contents
