Table of Contents
Advertisement
S
S
UPER
ERVER 7043M-8/7043M-6 Manual
Legacy Diskette A
This setting allows the user to set the type of floppy disk drive installed as
diskette A. The options are Disabled, 360Kb 5.25 in, 1.2MB 5.25 in, 720Kb
3.5 in, 1.44/1.25MB, 3.5 in and 2.88MB 3.5 in.
Legacy Diskette B
This setting allows the user to set the type of floppy disk drive installed as
diskette B. The options are Disabled, 360Kb 5.25 in, 1.2MB 5.25 in, 720Kb
3.5 in, 1.44/1.25MB, 3.5 in and 2.88MB 3.5 in.
! ! ! ! ! Primary Master/Primary Slave/Secondary Master/Secondary
Slave
These settings allow the user to set the parameters of the IDE Primary
Master/Slave and IDE Secondary Master/Slave slots. Hit <Enter> to activate
the following sub-menu screen for detailed options of these items. Set the
correct configurations accordingly. The items included in the sub-menu are:
Main
Advanced
Type:
Multi Sector Transfer:
LBA Mode Control:
32-bit I/O:
Transfer Mode:
Ultra DMA Mode:
SMART Monitoring:
F1 Help
Esc Exit
Select Menu
Phoenix BIOS Setup Utility
Security
[Auto]
[16 Sectors]
[Enabled]
[Enabled]
[Fast PIO 4]
[Disabled]
[Enabled]
Select Item
-/+
Enter Select!Sub-Menu
Boot
Change Values
7-4
Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit
Advertisement
Table of Contents
