Table of Contents
Advertisement
S
S
UPER
ERVER 6023L-8R Manual
USB Ports
Power Supplies (2)
Mouse/Keyboard
Figure 6-1.
6-2
Control Panel
The control panel (located on the front of the chassis) must be connected
to the JF1 connector on the motherboard to provide you with system status
indications. A ribbon cable has bundled these wires together to simplify the
connection. Connect the cable from JF1 on the motherboard to JP4 on the
Control Panel PCB (printed circuit board). Make sure the red wire plugs into
pin 1 on both JF1 and JP4. Pull all excess cabling out of the airflow path.
The LEDs inform you of system status.
LEDs and the control panel buttons. Details on JF1 can be found in Chapter
5.
Slim-Line CD-ROM Drive
SCSI Drives (6)
Control Panel/System LEDs
Printer Port
COM1 Port
Ports
Chassis: Front and Rear Views
6-2
Floppy Drive
System Reset
VGA Port
Full-sized PCI Slots (3)
LAN Ports
See Chapter 3 for details on the
5 1/4" Drive Bay
Main Power
External SCSI Port
Advertisement
Table of Contents
