Table of Contents
Advertisement
SCSI Drive Installation
1.
Mounting a SCSI drive in a drive carrier:
The SCSI drives are mounted in drive carriers to simplify their installation
and removal from the chassis. These carriers also help promote proper
airflow for the SCSI drive bays. For this reason, even empty carriers
without SCSI drives installed must remain in the chassis to cool each
drive equally. To add a new SCSI drive, install a drive into the carrier
with the printed circuit board side toward the carrier so that the mounting
holes align with those in the carrier. Secure the drive to the carrier with
four screws, as shown in Figure 6-3.
Figure 6-3. Mounting a SCSI Drive in a Carrier
Use caution when working around the SCSI backplane.
Do not touch the backplane with any metal objects
!
and make sure no ribbon cables touch the backplane
or obstruct the holes, which aid in proper airflow.
Important:
are installed, all SCSI drive carriers must remain in the
!
drive bays for proper airflow.
Chapter 6: Advanced Chassis Setup
Regardless of how many SCSI hard drives
6-5
Advertisement
Table of Contents
