Table of Contents
Advertisement
S
UPERSERVER 6023L-8R User's Manual
5-2
Xeon Processor and Heatsink Installation
When handling the processor package, avoid placing direct
pressure on the label area of the fan. Also, do not place the
!
motherboard on a conductive surface, which can damage the
BIOS battery and prevent the system from booting up.
IMPORTANT: Always connect the power cord last and always remove it
before adding, removing or changing any hardware components.
sure that you install the processor into the CPU socket before you install
the heatsink. The X5DLR-8G2 can support either one or two Xeon 512k L2
cache processors with clock speed up to 3.06 GHz. If installing one pro-
cessor only, install it into CPU socket #1.
1. Lift the lever on the CPU socket.
Lift the lever completely or you will
damage the CPU socket when
power is applied. (Install a
processor into CPU #1 socket
first.)
2. Install the CPU in the socket. Make sure
that pin 1 of the CPU is seated on pin 1 of
the socket (both corners are marked with a
triangle). When using only one CPU, install it
into CPU socket #1 (CPU socket #2 is auto-
matically disabled if only one CPU is used).
3. Press the lever down until
you hear it *click* into the
locked position.
Socket lever
Pin 1
Socket lever in
locked position
5-2
Make
Advertisement
Table of Contents
