Event Log Configuration - Supermicro SUPERSERVER 6023L-8R User Manual

Supermicro superserver 6023l-8r servers: user guide
Hide thumbs Also See for SUPERSERVER 6023L-8R:
Table of Contents

Advertisement

Chapter 7: AMIBIOS

Event Log Configuration

Event Logging
This option Enables or Disables the logging of events. You can use this
screen to select options for the Event Log Configuration Settings. You can
access sub screens to view the event log and mark all events as read. Use
the up and down arrow keys to select an item, and the plus (+) and minus
(-) keys to change the option setting. The settings are described on the
following pages. The screen is shown below.
ECC Event Logging
This option Enables or Disables the logging of ECC events.
The events
logged by AMIBIOS are post errors such as a bad BIOS, floppy errors, or
hard drive errors.
Clear All Event Logs
This option can be used to tell the system to clear the event log on the next
boot up. The settings are No and Yes.
View Event Log
Highlighting this and pressing <Enter> will allow you to view the unread
events from the event log area.
Mark All Events As Read
Highlighting [OK] and pressing <Enter> will mark all events in the log area as
having been read. The settings are OK and Cancel.
7-13

Advertisement

Table of Contents
loading

Table of Contents