Table of Contents
Advertisement
S
S
UPER
ERVER 6023L-8R Manual
2.
Installing/removing hot-swap SCSI drives:
The SCSI drive bays are located in the front of the chassis, making them
easily accessible for installation and removal. The SCSI drives are hot-
swap units, meaning that they can be installed and removed while the
system is running. To remove a SCSI drive, first push the colored
release button located beside the drive's LEDs, then swing the handle
fully out and use it to pull the SCSI drive carrier straight out (see Figure
6-4).
Release Button
Important:
!
in the drive bay to maintain proper cooling airflow.
Handle
Figure 6-4.
Removing SCSI Drives
All of the SCSI drive carriers must remain
6-6
Advertisement
Table of Contents
