Table of Contents
Advertisement
S
UPERSERVER 6023L-8R User's Manual
3. Gently press down on the DIMM module until it snaps into place in the
slot. Repeat for all modules (see step 1 above).
Memory Support
The X5DLR-8G2 only supports ECC registered PC2100/1600 (DDR-260/200)
SDRAM memory. An interleaved memory configuration is used (see step 1).
PC2100 memory is supported but only at 200 MHz (PC1600 speed). PC100/
133 SDRAM is not supported. It is highly recommended that you do not mix
memory modules of different sizes and speeds.
See Figures 5-5a and 5-5b on the following page for installing and removing
memory modules.
Figure 5-5a.
To Install: Insert module vertically and press down until it snaps into
place. Pay attention to the notch on the bottom of the module.
To Remove: Use your thumbs to gently push each release tab outward
to free the DIMM from the slot.
Side View of DIMM Installation into Slot
Figure 5-5b.
Top View of DIMM Slot
5-8
Advertisement
Table of Contents
