Overheat Led; Nic2 Led; Nic1 Led; Ide/Sata Led - Supero SUPERSERVER 5015M-MF User Manual

Overheat LED (OH)
Connect an LED to the OH connection
on pins 7 and 8 of JF1 to provide ad-
vanced warning of chassis overheat-
ing. Refer to the table on the right for
pin defi nitions.
NIC2 (JLAN2) LED
The LED connections for JLAN2 are
on pins 9 and 10 of JF1. Attach an
LED cable to display network activ-
ity. See the table on the right for pin
defi nitions.
NIC1 (JLAN1) LED
The LED connections for JLAN1 are
on pins 11 and 12 of JF1. Attach an
LED cable to display network activ-
ity. See the table on the right for pin
defi nitions.

IDE/SATA LED

The IDE/SATA LED connection is lo-
cated on pins 13 and 14 of JF1. This
LED is used to display all IDE and
SATA activity. See the table on the
right for pin defi nitions.
Chapter 5: Advanced Motherboard Setup
OH/Fan Fail LED
Pin Defi nitions (JF1)
Pin#
7
8

NIC2 LED

Pin Defi nitions (JF1)
Pin#
9
10

NIC1 LED

Pin Defi nitions (JF1)
Pin#
11
12
IDE/SATA LED
Pin Defi nitions (JF1)
Pin#
13
14
5-13
Defi nition
Vcc
Ground
Defi nition
Vcc
Ground
Defi nition
Vcc
Ground
Defi nition
Vcc
HD Active