Table of Contents
Advertisement
S
S
UPER
ERVER 5015M-MR(+)/5015M-MF(+) User's Manual
Power On LED
The Power On LED connector is lo-
cated on pins 15 and 16 of JF1 (use
JLED for a 3-pin connector). This
connection is used to provide LED
indication of power being supplied to
the system. See the table on the right
for pin defi nitions.
NMI Button
The non-maskable interrupt button
header is located on pins 19 and 20
of JF1. Refer to the table on the right
for pin defi nitions.
Fan Headers
There are fi ve fan headers on the
motherboard, which are designated
Fan1 through FAN6/CPU. Connect
the fan on your CPU heatsink to the
FAN6/CPU header. See the table on
the right for pin defi nitions.
ATX PS/2 Keyboard and
PS/2 Mouse Ports
The ATX PS/2 keyboard and the
PS/2 mouse are located on J28. The
mouse port is above the keyboard
port. See the table on the right for
pin defi nitions.
Power LED
Pin Defi nitions (JF1)
Pin#
15
16
NMI Button
Pin Defi nitions (JF1)
Pin#
19
20
Fan Header
Pin Defi nitions
Pin#
1
2
3
4
PS/2 Keyboard and
Mouse Port Pin
Defi nitions (J28)
Pin#
Defi nition
1
Data
2
NC
3
Ground
4
VCC
5
Clock
6
NC
5-14
Defi nition
5V Stby
Control
Defi nition
Control
Ground
(FAN1-6)
Defi nition
Ground (Black)
+12V (Red)
Tachometer
PWM Control
Advertisement
Table of Contents
