Table of Contents
Advertisement
S
S
UPER
ERVER 5013C-MT User's Manual
Reset Connector
The reset connector is located on
pins 3 and 4 of JF1 and attaches
to the reset switch on the com-
puter chassis.
the right for pin definitions.
Overheat LED (OH)
Connect an LED to the OH connec-
tion on pins 7 and 8 of JF1 to pro-
vide advanced warning of chassis
overheating. Refer to the table on
the right for pin definitions.
GLAN2 LED
The GLAN2 LED connection is lo-
cated on pins 9 and 10 of JF1. At-
tach the GLAN2 LED cable to dis-
play GLAN2 activity. Refer to the
table on the right for pin definitions.
GLAN1 LED
The GLAN1 LED connection is lo-
cated on pins 11 and 12 of JF1. At-
tach the GLAN1 LED cable to dis-
play GLAN1 activity. Refer to the
table on the right for pin definitions.
See the table on
5-12
Reset Pin
Definitions
(JF1)
Pin
Number
Definition
3
Reset
4
Ground
Overheat (OH) LED
Pin Definitions
(JF1)
Pin
Number
Definition
7
Vcc
8
GND
GLAN2 LED
Pin Definitions
(JF1)
Pin
Number
Definition
9
Vcc
10
GND
GLAN1 LED Pin
Definitions
(JF1)
Pin
Number
Definition
11
Vcc
12
GND
Advertisement
Table of Contents
