Installing The System Into A Rack; Basic Installation Procedure - Supero SUPERSERVER 5015M-MF User Manual

S S
UPER ERVER 5015M-MR(+)/5015M-MF(+) User's Manual
2-4

Installing the System into a Rack

(Rack hardware optional)
This section provides information on installing the SuperServer 5015M-MR(+)/
5015M-MF(+) into a rack unit. If the system has already been mounted into a rack,
you can skip ahead to Sections 2-5 and 2-6.

Basic Installation Procedure

The 5015M-MR(+)/5015M-MF(+) server comes with two rack mounting brackets,
which are located on each side at the front of the chassis. To mount the system
into a rack, simply screw these brackets directly to the front of the rack (two screws
for each bracket). As Figure 2-1 shows, the brackets can be located at the front of
the chassis (left fi gure) or moved approximately one-third to the rear of the chassis
(right fi gure).
Figure 2-1. Installing the Server into a Rack: Basic
2-4