Checking The Motherboard Setup - Supero SUPERSERVER 5015M-MF User Manual

S S
UPER ERVER 5015M-MR(+)/5015M-MF(+) User's Manual
Figure 2-4. Installing the Server into a Telco Rack: Basic
2-5

Checking the Motherboard Setup

After you install the 5015M-MR(+)/5015M-MF(+) in the rack, you will need to open
the unit to make sure the motherboard is properly installed and all the connections
have been made.
1. Accessing the inside of the server (Figure 2-6)
First, release the retention screws that secure the unit to the rack. Grasp the two
handles on either side and pull the unit straight out until it locks (you will hear a
"click"). Then, remove the screws from the lips on either side of the chassis top
cover (see Figure 2-6 for location). Next, depress the two buttons on the top
[5015M-MR(+) shown]
2-8