Checking The Network Connection Status; Checking The Network Connection Status From The Control Panel - Epson XP-8600 Series User Manual

Adding or Replacing the Computer or Devices
When changing the network name (SSID), all connected devices are disconnected. Use the new network name
(SSID) if you want to re-connect the device.
Change Password
Change the Wi-Fi Direct (simple AP) password for connecting to the printer to your arbitrary value. You can set
the password in ASCII characters that is displayed on the software keyboard on the control panel. You can enter 8
to 22 characters.
When changing the password, all connected devices are disconnected. Use the new password if you want to re-
connect the device.
Disable Wi-Fi Direct
Disable Wi-Fi Direct (simple AP) settings of the printer. When disabling it, all devices connected to the printer in
Wi-Fi Direct (Simple AP) connection are disconnected.
Restore Default Settings
Restore all Wi-Fi Direct (simple AP) settings to their defaults.
The Wi-Fi Direct (simple AP) connection information of the smart device saved to the printer is deleted.

Checking the Network Connection Status

You can check the network connection status in the following way.
Related Information
"Checking the Network Connection Status from the Control Panel" on page 280
&
"Printing a Network Connection Report" on page 281
&

Checking the Network Connection Status from the Control Panel

You can check the network connection status using the network icon or the network information on the printer's
control panel.
Checking the Network Connection Status using the Network Icon
You can check the network connection status and strength of the radio wave using the network icon on the
printer's home screen.
>

Checking the Network Connection Status

280
> ...
Chec