4.5. Change of Bits
Attention:
Disconnect driver from air supply.
To get a reliable bit-location the screwdriver has a quick-change-chuck in
standard.
1.
Disconnect driver from air supply.
2.
Unscrew spring sleeve (left-hand thread).
3.
Pull both shank screws 828756 to the back and put out the bit.
4.
Push in the new bit into the hex. female of the clutch shaft.
5.
Let go the both shank screws 828756 and the bit is fixed.
2 Shank Screw
828756
17