Table of Contents
Advertisement
1.7. Observe Environmental Regulations
When working on or with the equipment, it is imperative to
observe all requirements in regards to waste-disposal and
proper recycling.
Especially during installation, repair or maintenance, water
damaging agents such as
must not leak into the ground or into the sewage system!
Such materials must be stored, transported, contained and
recycled in suitable containers.
2
Designated Equipment Use
Screwdriver Spindles are constructed for the stationary use in:
•
Lever Operated Single Spindle Screwdriving Stations
•
Construction Units
•
Multi-Spindle Screwdriving Stations
•
Robot End-Of-Arm Tooling
•
X-Y-Z Screw-Assembly Stations
These Spindles assemble screws to torque and measure that torque more
accurately than any subsequent testing method. They tighten and test the
assembly in one operation.
DEPRAG SENSOMAT-ULTRA screwdrivers are mostly used for thread-
ridging, thread-cutting or self-drilling through bolts.
•
lubricating grease and oil
•
hydraulic fluid
•
cooling agents
•
solvent-containing cleaning agents
8
Advertisement
Table of Contents
