Table of Contents
Advertisement
Commissioning
Servomotor STE
Servomotor STM 40
The BT300 electronic control system
works with the STE4.5 numerically
controlled servomotor. For monitoring
the function and direction of rotation,
there is a driver with digital feedback via
encoder disc.
Observe the commissioning procedure
for BT300.
The connection is documented in the
burner wiring diagram.
Note:
Before commissioning, the zero position
of the servomotors MUST be checked.
The servomotor is sealed. Opening the
servomotor invalidates the warranty!
Model
Power supply:
Power consumption:
Angle of rotation:
Run time:
Nominal torque:
static holding moment:
Dimensions (WxHxD):
The STM 40 servomotor is used in
conjunction with various electronic
compound control systems. Priority with
products supplied by "Lamtec"
(Etamatic, Etamatic OEM, VMS, FMS).
With some types of burner, the motor is
also used as a servomotor for other
servo components independently of the
compound control system (e.g. nozzle
rod safety adjustment). Please refer to
the appropriate section of the operating
instructions.
The electrical diagram for the burner
shows how to establish the servomotor's
electrical connection.
Observe the documentation issued by
the manufacturer.
46
STE 4.5
24 VDC ± 20%
7.5 W
90°
5s/90° @ 180 Hz
3 Nm
2.6 Nm
90 x 136 x 116
Technical data
Voltage:
Frequency:
Angle of rotation:
Running time:
Nominal torque:
Static holding moment:
Dimensions (W x H x D): 93 mm x 144 mm x 149 mm
Potentiometer (fitted):
03/2016 - Art. Nr. 4200 1044 8002A
230 V AC
50 Hz
90°
40 sec. for 90°
15 Nm
8 Nm
5 k
Advertisement
Table of Contents
