Table of Contents
Advertisement
Installation
Combustion components
Installation
Installing the combustion components
• Check that the ring seal J1 is fitted and
correct positioned on the gas elbow flange.
• Check the settings for the ignition electrode
and burner head as shown.
• Insert the combustion components into the
flame tube, tighten the securing screws S3.
• Connect the oil supply (fast-closing
couplings). Please note: Check the correct
assignment of the supply and return lines.
• Connect the ignition cable to the
combustion components.
• Connect the ignition cable to the ignition
transformer T1.
Important
If the system is converted from natural gas
type E to L or LL or vice versa, the burner
must be reset.
It is not necessary to modify the combustion
components.
Note: To provide an example, only the
scenario with burner N6 GL-E is shown.
Note: To provide an example, only the
scenario with burner EKEVO 6 GL-E is
shown.
03/2016 - Art. Nr. 4200 1044 8002A
15
Advertisement
Table of Contents
