Gas train components
Adjusting the MBC-1900-7000-SE pressure regulation component
Adjusting the MBC-1900-7000-SE
pressure regulation component
1. Open the protective caps.
2. Start the burner, correction of set
values possible while burner in
operation (see figure).
3. Check ignition safety of the burner.
4. If necessary repeat the setting steps.
Check intermediate values.
5. Apply a security seal to the adjusting
screw (see below).
Optimum combustion and ignition
safety must be ensured.
Allen key no. 2.5
03/2016 - Art. Nr. 4200 1044 8002A
23