Lcd Panel Indicators - Njoy Balder Series User Manual

6.2. LCD panel indicators

Display
Remaining backup time information
8 8
Warning & Fault information
8 8
Mute operation
Input/Output & Battery information
Vac
Hdc
Hz
OUTPUT
Load information
OVER LOAD
SHORT
Mode operation information
ECO
14
Function
Indicates battery discharge time in numbers.
H: hours, M: minutes, S: seconds
Indicates that the specified warning and fault occurs.
Indicates the fault codes, and the codes are listed in
details in section 3-9.
Indicates that the UPS alarm is disabled.
Indicates the output voltage, frequency or battery
voltage.
Vac: output voltage, Vdc: battery voltage, Hz: frequency
Indicates the load level by 0-25%, 26-50%, 51-75%, and
76-100%.
Indicates overload.
Indicates the load or the output is short.
Indicates the UPS connects to the mains.
Indicates the battery is working.
Indicates the bypass circuit is working.
Indicates the ECO mode is enabled.
Indicates the Inverter circuit is working.
Indicates the output is working.