4
Status Indicators
Status
Model
On
battery
Low
battery
Overload
UPS Fault
5
Important Safety Warnings
Place the UPS indoors in an area that has adequate
airflow and no excessive dust. Do NOT allow the UPS
to be exposed to moisture, rain, excessive heat or
direct sunlight.
The use of the UPS is NOT recommended in life
support applications where failure of this equipment
can reasonably be expected or when its safety or
effectiveness could be affected significally.
Please always disconnect the input power cord from
the wall outlet before replacing the battery.
6
Visual Indication
600VA/
1000VA
800VA
Green Batt. Mode
AC Mode:
LED – Flash
green lighting
Battery Mode:
-
yellow flashing
Fault LED:
-
red lighting
Fault LED:
-
red lighting
Alarm
Sounding every 10
seconds
Sounding every second
Sounding every 0.5
seconds
Continuously sounding