Shure DCS 6000 User Manual page 32

DIS Digital Conference System
# Menu
32
Settings
User Manual CU 6110 rev A.docx
User Manual
Description
The Interlock settings are used to
Interpreter Lock –
setup the interlock between the
Interpretation channels.
The settings are:
An interpreter cannot switch on his
Complete Lock
microphone to any occupied
interpreter channel.
This is the default setting.
An interpreter turning on his
No Lock
microphone to any occupied
interpreter channel, will turn of the
interpreter occupying the channel.
An interpreter turning on his
A interrupt A
microphone on an A-channel will
interrupt another interpreter using
his A channel
An interpreter turning on his
A interrupt B
microphone on an A-channel will
interrupt another interpreter using
his B channel, but will not interrupt
an interpreter using his A channel.
An interpreter turning on his
A interrupt A+B
microphone on an A-channel will
interrupt another interpreter using
his A or B channel.