Shure DCS 6000 User Manual page 57

DIS Digital Conference System
This command sets the priority of a microphone.
<seat_number>: The microphone to adjust
<priority>: The desired priority. Possible values: 0 to 5, where 0 is the lowest priority and 5 is the highest priority.
The CU responds to this command by returning a 'mic_priority' message.
10.2.1.14 Retrieve microphone status
Ask the cu to deliver status of the system (microphones in speak, and microphones in request list).
mic_status<CR>
The CU responds by sending microphone system status. The status is a list of commands from the CU:
seat_state (for all microphones in the system)
mic_priority (for all microphones in the system)
mic_mode
mic_interrupt
max_total_speakers
max_speakers
max_requests
mic_request_on (for all microphones in request list)
mic_on
mic_status_done
10.2.1.15 Help
help<CR>
Help information is available listing all commands supported by the CU. If a command is included in the
help <command><CR>
help command, details on that command is returned.
Note: The help command results in a number of command lines returned from the CU. The command is intended for use in a
simple console.
(for all microphones on)
User Manual CU 6110 rev A.docx
User Manual
57